Preferred Packaging

Leader in Packaging Solutions

 

SEMI AUTO SEALER-TUNNEL COMBINATIONS

 
 

This unique “All-In-One” L-Bar Sealer and Shrink Chamber features new “Micro Knife Technology” which can seal PVC and POF shrink films.  With the dual magnet hold down, the operator simply lowers the hooded chamber and the magnets apply the seal pressure to produce great seals and eliminate operator fatigue.  The magnets hold the chamber closed during the shrink cycle and releases when the shrink cycle is complete.  Complete cycle time is approximately 5-10 seconds.

FEATURES

  • Compact size

  • Micro Knife Technology Seals PVC or POF

  • Magnetic Hold Down

  • Dual Mode Switch (Seal only or Seal & Shrink)

  • Heavy Duty Plexiglass Hood

  • Adjustable Table Lowers 2” for High Products

  • SS-48ST available in 110V and 220V

  • Units ships via LTL freight only.  Call for freight rates

 

“All-in-One” Sealer/Chamber: Compact L” Sealer and Hooded Shrink Chamber in one complete unit. Machine comes with “Band Seal Technology,” Magnetic Hold Down For seal and shrink Cycle, Pinwheel Hole Punch, and Casters.

Seal Area: 16”L x 22 ”W x 8”H
Power: 220 volts – 25 amps – single phase
Crated dimensions: 3”L x 28”W x 45”H

 

The PP-1519 ECMC Semi-Automatic L-Bar Sealer w/ attached tunnel is a heavy duty production based unit designed to run 2 shifts per day if needed. With its heavy duty frame construction, cast aluminum seal head and Micro Knife Seal Technology you will get years of use with minimal repairs. This machine is capable of operating at speeds of 8-12 PPM.

Tunnel features:  Live roller rod conveyor with fully re-circulating air chamber,  AC variable speed conveyor, 0-60 FPM, digital temperature control and automatic cool down with shut off.

Available in 110 volts or 220 volts.

FEATURES

  • New design featuring “Micro-Knife” technology

  • Capable of 8-12 packages per minute

  • Seal size:  15”W x 19”L

  • Tunnel dimensions:  20”L x 16”W x 6”H

  • Tunnel features re-circulating air chamber

  • Optional:  magnet hold, power discharge conveyor

 
PP1622MK Econo Set Angel.jpg

PP1622MK Econo set Features:

1. Dual magnetic arm hold down applies seal pressure;

2. Powered discharge conveyor automatically transfers product into shrink tunnel;

3. Heavy duty steel frame construction with baked enamel finish

4. Cradle style film rack for easy loading;

5. “Micro Knife” band ribbon – Teflon coated band ribbon      produces fast clean seals every time, guaranteed for (2) year with “no charge” replacement.

6. Stainless steel film clamps

7. Multiple Pin Perforation hole punch;

8. Heavy duty seal head return cylinder;

9. Independent seal and dwell timer;

10. Heavy duty locking casters

PP1812-28 Features:

1. Four directional air flow, fully re-circulating air chamber;

2. Variable air velocity control;

3. Solid state digital temperature control;

4. ½ HP Blower Motor;

5. Sealed bearings on drive and idler shafts;

6. Live roller rod conveyor for best possible shrink;

7. State of the art AC variable speed drive motor with anti jam safety feature;

8. Thermal overload protection on all motors;

9. Chamber size of 18” W x 12” H x 28” L

10. Automatic tunnel cool down with shut off;

11. Heavy duty locking casters with leveling screws;

12. Tunnel heats up to 300 degrees in less than 10 minutes.